Welcome to the Chane Music & Cinema.
hORNS Universium Among Top 5...
09-26-2016, 11:05 AM
Visit regularly for limited specials; the best audio deals we have!
Another new-in-box Swan D...
08-24-2016, 04:27 PM
General community interest only. General audio forum below.
2015 AHA Heart Walk for Cohen
10-02-2015, 08:54 AM
Please keep it clean and civil
Any DIY or contractors to...
09-27-2016, 07:41 AM
Used audio. Used just about anything. Sell it here.
08-01-2016, 06:27 PM
Affordable performance loudspeakers.
Breaking in a loudspeaker
09-12-2016, 12:50 PM
CS 1.8T humming noise
02-27-2016, 09:55 PM
Onkyo Receiver vs. Preamp
11-14-2014, 06:43 AM
Tell others about your CMC experience with a review here.
01-03-2016, 11:48 AM
In the YouTube age, do your reviewing with a camera!
Swan D1080IV Review
10-29-2012, 02:10 PM
A conversation about high end sources.
How do you find your new...
05-09-2016, 04:30 AM
Gear we didn't make. The hifi universe.
Need help with 250's
03-26-2015, 01:26 PM
Tech, Tips, and Talk.
Fish and your HT
05-08-2016, 10:32 PM
Behind the scenes at CMC
A5.4 / A5rx-c Planned Updates
09-10-2016, 01:23 PM
Welcome to our newest member, ipap2
I need to cut off an inch or so of formica countertop. There appears to be pressboard underneath, not solid wood or MDF. We're installing a new fridge in an old house. Has anyone done this and care...
As reported by Positive Feedback, the best sound at the Munich high end show includes the remarkable hORNS Universium, also seen in at Chane here.
This was an (almost) full horn design pair of...
We get asked a lot how to break in a new speaker. While there's no absolute best way or finite length of break-in time, here's a method I've found to work well.
With a flat-faced speaker...
Thanks for the prompt reply Jon! I got super excited when I saw the updates to the A1 and A2 and couldn't help but imagine what would the A5 sound like! :)
It's a natural question, but I'm going to wait until we've something concrete to announce about any progression for the two tower models. Chane has been developing things for a long time...